G) Sides Installation

Moderate · 45 minutes · by Ben Withem · last edited 2022-04-04

Tools

Allen Key

Parts

Step 1 — Install Front

Note You may need to loosen the bottom corner cubes and base acrylic panel. This will ensure all mating faces are not under tension.
Using (16) M3 x 10 socket head screws and (16) M3 washers attach the front acrylic panel.

Step 2 — Install Right Acrylic

Using (16) M3 x 10 socket head screws and (16) M3 washers attach the right acrylic panel.

Step 3 — Install Rear Acrylic

Using (16) M3 x 10 socket head screws and (16) M3 washers attach the rear acrylic panel.

Step 4 — Install Left Acrylic

Using (16) M3 x 10 socket head screws and (16) M3 washers attach the left acrylic panel.
Note Tighten the corner cubes and panels you may have loosened.

Step 5 — Install Feet (x4)

Insert (4) M3 x 10 socket head screws and (4) M3 washers into each corner.
Thread (4) M3 nuts onto the screws you inserted.
Slide the 73 mm 1515 extrusion on the (4) M3 nuts and tighten the socket head screws.
Attach the printed foot to the bottom of the extrusion using a M3 x 10 socket head screw.

Step 6 — Complete Side Installation

Panel assembly complet.

Originally at https://railcore.dozuki.com/Guide/G)+Sides+Installation/29