kit users

• Hex Wrenches 2mm, 2.5mm and 3mm
• Philips Head and Flat screwdriver
• Flush Cutters
• Soldering iron or similar (for installing press-fit inserts into printed parts)
• Heat-Set Insert Installation tip M3
• 5.5mm ratcheting spanner and/or 5.5mm socket screwdriver (for M3 nuts)

For aligning the X Carriages & Y Rail

• 123 blocks
• standard woodworking clamps
• machinist square
• Vernier calipers.

self sourcers

• 3mm tap
• Dupont Crimping Tool
• Ferrule Crimping Tool
• Multimeter with ThermoCouple
• Connector Kit
• Connector Kit for power wires
• Blue Loctite
• Flush Cutters
• Electrician’s Scissors
• automatic wire stripper